Blue Screen of Death 650i WXP FI 5650C

Blue Screen of Death 650i WXP FI 5650C

Postby mosandman » Tue Jan 22, 2008 3:09 pm

Running XP Pro with all updates, 650i Ver 3.2y displayed on computer Boot, Driver date 02-07-2001. Dell 370 3.2 with 2Gig Ram. Can scan 50 to 100 pages then blue screen, reboot can scan 2 or 3 pages before I get a Blue Screen. Problem is variable but it happens and does not seem to be dependent on the number of scans. Have considered trying USB. Drivers installed with VRS 4.1 pro. Any ideas? I've looked for updated drivers but cannot find any updates for the Adrenaline SCSI card. The scanner is a Fujitsu 5650C.
mosandman
Participant
 
Posts: 5
Joined: Fri Dec 28, 2007 2:22 pm

Postby rpapa » Tue Jan 22, 2008 4:02 pm

what application are you using to scan?
rpapa
Participant
 
Posts: 3552
Joined: Mon Mar 13, 2006 12:00 pm
Location: Livonia, Michigan

Postby mosandman » Wed Jan 23, 2008 7:23 am

I'm using VRS 4.1 in a Proprietary Oracle data base. We are scanning documents for future retrieval.
mosandman
Participant
 
Posts: 5
Joined: Fri Dec 28, 2007 2:22 pm

Postby rpapa » Wed Jan 23, 2008 7:43 am

have you tried scanning in vcdemo? and are you getting the same results?
rpapa
Participant
 
Posts: 3552
Joined: Mon Mar 13, 2006 12:00 pm
Location: Livonia, Michigan

Postby mosandman » Wed Jan 23, 2008 7:45 am

Blue Screened again, Technical Information:
***STOP: 0x00000050 0xF23BC48C, 0x00000000, 0xBF926C31, 0x00000000)
***Win32k.sys- address BF926C31 base at BF800000, datestamp 45f013f6

What I'm thinking is bad memory module??? or even a problem with the processor????
mosandman
Participant
 
Posts: 5
Joined: Fri Dec 28, 2007 2:22 pm

Postby mosandman » Wed Jan 23, 2008 7:48 am

no I have not tried scanning in VCDEMO mode. Now my problem is getting computer to reboot successfully getting boot message:
x300 pro 128mb Bio p/n 113-a33405-100
I'm going to pull the processor reseat and do the same with memory and even replace memory before I give up. I'll even try a different computer.
mosandman
Participant
 
Posts: 5
Joined: Fri Dec 28, 2007 2:22 pm

Postby russell@centuryc.com » Wed Jan 23, 2008 5:24 pm

Starting to sound like hardware problems. You might also try using a different PCI slot. I'm old school when it comes to keeping things on different interrupts. Modern stuff is supposed to share, but some drivers share better then others.
russell@centuryc.com
Participant
 
Posts: 3374
Joined: Wed May 17, 2006 12:53 pm
Location: USA

Postby mosandman » Fri Jan 25, 2008 10:32 am

I believe the problem was a less than acceptable contact of the CPU,memory, or SCSI card. Since removing all removable parts, cleaning contacts with a pencil eraser and replacing I've had no Blue Screen(s) I would say "problem solved", with fingers crossed but I'm not holding my breath! :lol:
mosandman
Participant
 
Posts: 5
Joined: Fri Dec 28, 2007 2:22 pm


Return to Adrenaline General Discussion

Who is online

Users browsing this forum: No registered users and 2 guests