Change settings for Verification Queue

Change settings for Verification Queue

Postby ddavydov » Mon Jun 30, 2014 9:30 am

Is it a way to switch Verification "blind entry" setting as "on" or "off" in the same Batch class depending on Document class in the batch ( in script or configuration)?
ddavydov
Participant
 
Posts: 51
Joined: Thu Jul 19, 2012 12:06 pm

Re: Change settings for Verification Queue

Postby russell@centuryc.com » Mon Jun 30, 2014 11:32 am

If you implement blind verification in scripting, then you can turn it on/off as you wish.
Russell
russell@centuryc.com
Participant
 
Posts: 3374
Joined: Wed May 17, 2006 12:53 pm
Location: USA

Re: Change settings for Verification Queue

Postby ddavydov » Mon Jun 30, 2014 12:29 pm

Thank you Russell, but my idea was to do it dynamically. When you process a batch the blind seting changes depending of document class each document belongs to.
ddavydov
Participant
 
Posts: 51
Joined: Thu Jul 19, 2012 12:06 pm

Re: Change settings for Verification Queue

Postby dkekesi » Tue Jul 01, 2014 7:17 am

Would be a logical feature, and even more logical would be to define it on the form type level. But unfortunately it is defined at the batch class level, so there's no way to turn the feature on/off dynamically.
Best Regards,

Daniel Kekesi
DocSoft Hungary
Image
dkekesi
Participant
 
Posts: 2569
Joined: Thu Dec 08, 2005 12:56 am
Location: Budapest, Hungary

Re: Change settings for Verification Queue

Postby russell@centuryc.com » Tue Jul 01, 2014 11:38 am

ddavydov wrote:Thank you Russell, but my idea was to do it dynamically. When you process a batch the blind seting changes depending of document class each document belongs to.

Oh, when you said "in script" I was thinking of implementing the blind entry "in script". You were talking about changing the configuration "in script".

Sorry, I think the answer is that you have to code your own verification so you have control over it. It's not that hard. Upon opening the document, copy the field value somewhere else, and erase the field. When it's entered, compare it with the stashed value and act accordingly. Just remember to write the value back before exiting the document.
Russell
russell@centuryc.com
Participant
 
Posts: 3374
Joined: Wed May 17, 2006 12:53 pm
Location: USA

Re: Change settings for Verification Queue

Postby ddavydov » Wed Jul 02, 2014 6:51 am

Thank you gentlemen for your responses.
I believe that Russell’s idea is the best solution for this problem.
ddavydov
Participant
 
Posts: 51
Joined: Thu Jul 19, 2012 12:06 pm


Return to Custom Modules General Discussion

Who is online

Users browsing this forum: No registered users and 1 guest